Ultra Thin IP66 LED Tunnel Lamp 44000lm Street Light For Garden
LED Flood Light Ultra Thin Module Spotlight Waterproof IP66
Security Lighting Road Garden Square Tunnel Lamp
EBF209 LED floodlights are widely used in shipyards,
petrochemicals, steel plants, power plants, petroleum and other
plants (fields). Light lighting.
| Rated voltage V | AC220V |
| Operating voltage range V | AC90-295V |
| Power(W) | 400W |
| Rated frequency Hz | 50Hz |
| Light source | LED solid state cold light source |
| Color rendering Ra | greater than 80 |
| Protection grade | IP65 |
| Anti-corrosion grade | WF2 |
| Power factor | >0.95 |
| Start-up time(min) | Instant |
| Restart time(min) | Instant |
| Shell material/thickness(mm) | 3 |
| Lampshade surface treatment | tempered glass |
| Insulation class | I |
| Inlet cable | Φ8-Φ10mm |
| Distance to height ratio | 2 |
| Dimensions | 762×293×115mm |
| Luminous flux (Lm) | 44000 |
| Light efficiency(Lm/W) | 110Lm/W |
| Life(H) | 100000 |
| Color temperature(K) | 3000～6000K |
| Weight(Kg) | 15.6Kg |
| Explosion-proof mark | ExnAnRIICT4 Gc |
| Explosion-proof number | CNEx17.3665 |
Installation information of LED Light:
1. Check all the parts and accessories of LED street lights;
2. Must cut off the power supply before installation;
3. Make sure LED street light is fixed tightly to the surface of
place for installation;
4. Connect the power line of light with power supply, then switch
on the power;
5. When it is working, it must be kept vertical downward.
Strict tests for led light:
All our LED street lights will be tested before shipping,so that we
can ensure the quality and light performance, such as current and
function test, earth connect test, temperature test, light
distribution test, vibration test, integrating sphere test, salt
spray test, aging test, etc.. Being responsible for our products is
being responsible for our customers.
Features:
The shell (radiator) is stretched and formed with aviation
lightweight aluminum alloy profiles. The large heat sink design
ensures sufficient heat dissipation surface area. At the same time,
each heat sink conforms to the thermal flow dynamics design to meet
the heat dissipation area while ensuring the heat conduction cross
section, making the LED The heat generated can be timely and
effectively exported to the surface of the housing (heat sink) to
ensure the heat dissipation performance of the LED and the service
life of the LED. At the same time, a heat conduction channel is
designed for each LED.
Adopt LED solid-state cold light source imported from Germany
Osram, with high luminous efficiency, long life and good color
rendering.
The power supply is Taiwan MEAN WELL power supply recognized by
international lighting experts with the best matching performance
for LED lamps, no flicker, stable power supply performance, and a
wide voltage range of AC85-265V.
The optical grade lens is used to complete the secondary light
distribution, and the light transmittance is high. Compared with
the ordinary lens, the light effect is increased by 10% to 20%. The
light distribution is uniform, making the light softer and
effectively improving the visual visibility.
End covers at both ends of the shell are designed for outdoor
dusty and rainy environments. The shell is designed with automatic
diversion and dust removal holes to ensure that dust cannot
accumulate for a long time, which affects the heat dissipation
performance.
The transparent parts use high borosilicate tempered glass, which
is safe, strong in impact resistance, and good in light
permeability.
The two ends of the shell are designed with dual respirators,
which can balance the internal and external pressure of the lamp
during the temperature change of the lamp to ensure the waterproof
and moisture-proof performance of the lamp, and it has the function
of heat to make the hot air flow and dissipate heat.
The seal is made of high and low temperature resistant silicon
rubber material, and the outer shell protection grade is IP65,
which is waterproof, dustproof and moisture-proof.
The mounting bracket is fixed by a double fixing method of
fastening bolts and adjusting bolts, which can adjust the angle
flexibly and double guarantee the installation tightness of the
lamp.
